Iveco Daily Dual Battery System Installation

Time for another custom battery system, this time in an Iveco Daily. The customer supplied us with a few of the items to be installed, including the two massive 230Ah AGM batteries and 12V ceiling fan. 

Here’s what else we installed for this Iveco Daily Dual Battery System: 

  • Enerdrive DC2DC 40+ Battery Charger with Solar Regulator
  • Fuse Panel
  • 2x Enerdrive 150 Watt Solar Panels
  • Custom Built Wall Panel

So, first up, we made the wall panel. This was made from plywood and carpeted. Next, we mounted the Enerdrive DC-DC Charger, fuse block and midi fuses onto the panel. The technician then ran 8 B&S cable from under the bonnet to the panel and wired the connection to the starting battery using a midi fuse. 

We then installed the two AGM batteries in the rear of the vehicle, wired them up and connected them to the fuse panel. After that we mounted the 2 Enerdrive solar panels to the roof of the vehicle and wired them into the wall panel. Rooftop mounted panels are a great option for vehicles like this one. Just park up somewhere in the sun and you are ready to go! 

We also installed the 12 volt fan on the roof of the vehicle and connected it up to the fuse panel. Once the Charger, midi fuses and fuse panels were all wired in, the technician tested everything was operating as it should, cleaned up the vehicle and the customer was ready for their next adventure.  

If you are looking to get a Custom Battery System set up on your vehicle, truck, caravan, camper trailer or horse float, get in touch with our technicians today! We can put together a custom quote or just have a chat about the options available, call 07 5479 6652.