Recently we completed a Toyota Landcruiser 200 Series Lithium Battery installation. 

Previously we had installed some accessories on this Toyota Landcruiser 200 Series and this time around we installed a lithium battery system, interior lights and some other accessoires. We installed: 

• Sentry 100Ah Slimline Lithium Battery 
• Redarc BCDC1240D
• Custom Slimline Battery Bracket
• Accessory Panels
• Interior lighting system
• Anderson Plug

The Install

To start with the technician mounted the interior lights in the rear of the vehicle and ran cables for the dual battery system. Next we wired up the under bonnet components and wired up the sockets on the tow bar of the vehicle. Once the wiring was run to the various components in the rear of the vehicle, the socket panels were installed in the rear drawer system. 

With the fridge slide and cage removed, the techician then installed the slimline battery tray on top of the rear drawers. The Redarc BCDC1240D and 6 way fuse panel were wired in and fitted onto the tray. From there we ran an ignition feed to connect to the module on the drivers side. Once everything was wired up, the final step was to install the slimline lithium battery and all components of the system were tested. 

We can customise a Dual Battery System to suit your vehicle and your needs. Whether it is under-bonnet, under-tray, portable or fixed, we have a solution to keep you powered up on the road and off the beaten track