Ford Everest Towing Upgrade
Good afternoon everyone, Briohny here from Accelerate Auto Electrics & Air Conditioning on the beautiful Sunshine Coast.
Today we’re gonna take you through a job that we’ve done on this Ford Everest. We’ve installed a Redarc TowPro Elite and an Anderson plug.
The reason we love the Redarc TowPro Elite is that rather than having a big box that sits under the steering column and you usually knock your knees on it, instead you’ve got a little dial that we’ve mounted really nicely into the dash here next to the gearstick and that way when you need to reach it in an emergency it’s right close and handy.
For all the other reasons that we love the Redarc TowPro Elite, check out one of our other videos that we’ll link in the descriptions below.
So under the bonnet, we’ve got a 50 Amp midi fuse and a 30 Amp circuit breaker. We’re also running 8 B&S cable that goes directly from the battery through to the rear of the car that hooks up to the Anderson plug.
We’ve then got 5 mm cable that goes from the battery into here where it then shoots off to the dial for the Redarc controller and then goes straight to the back again into the trailer plug.
So at the rear of the vehicle here, we’ve got the Anderson plug that we’ve installed.
If you need any help with towing your caravan or trailers, you can give us a call on 1300-227-353, email us at ‘[email protected]’, or comment below.